View TC7MPN3125FTG_8322520.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tc7mpn3125fk/ftg 2014-03-01 1 toshiba digital integrated circuit silicon monolithic tc7mpn3125fk, TC7MPN3125FTG low voltage/low power 2-bit 2 dual supply bus transceiver the tc7mpn3125fk/ftg is a dual supply, advanced high-speed cmos 4-bit dual supply voltage interface bus transceiver fabricated with s ilicon gate cmos technology. it is also designed with over voltage tolerant inputs and outputs up to 3.6 v. designed for use as an interface between a 1.2-v, 1.5-v, 1.8-v, or 2.5-v bus and a 1.8-v, 2.5-v or 3.6-v bus in mixed 1.2-v, 1.5-v, 1.8-v or 2.5-v/1.8-v, 2.5- v or 3.6-v supply systems. the a-port interfaces with the 1. 2-v, 1.5-v, 1.8- v or 2.5-v bus, the b-port with the 1.8-v, 2.5-v, 3.3-v bus. the direction of data transmission is determined by the level of the dir input. the enable input (o e) can be used to disable the device so that the buses are effectively isolated. all inputs are equipped with prot ection circuits against static discharge or transi ent excess voltage. features ? bidirectional interface between 1.2-v and 1.8-v, 1.2-v and 2.5-v, 1.2-v and 3.3-v, 1.5-v and 2.5-v, 1. 5-v and 3.3-v, 1.8-v and 2.5-v, 1.8-v and 3.3-v or 2.5-v and 3.3-v buses. ? high-speed operation: t pd = 13.7 ns (max) (v cca = 2.5 0.2 v, v ccb = 3.3 0.3 v) t pd = 14.8 ns (max) (v cca = 1.8 0.15 v, v ccb = 3.3 0.3 v) t pd = 16.0 ns (max) (v cca = 1.5 0.1 v, v ccb = 3.3 0.3 v) t pd = 61 ns (max) (v cca = 1.2 0.1 v, v ccb = 3.3 0.3 v) t pd = 18.5 ns (max) (v cca = 1.8 0.15 v, v ccb = 2.5 0.2 v) t pd = 19.7 ns (max) (v cca = 1.5 0.15 v, v ccb = 2.5 0.2 v) t pd = 60 ns (max) (v cca = 1.2 0.15 v, v ccb = 2.5 0.2 v) t pd = 58 ns (max) (v cca = 1.2 0.1 v, v ccb = 1.8 0.15 v) ? output current: i ohb /i olb = 3 ma (min) (v ccb = 3.0 v) i ohb /i olb = 2 ma (min) (v ccb = 2.3 v) i ohb /i olb = 0.5 ma (min) (v ccb = 1.65 v) i oha /i ola = 9 ma (min) (v cca = 2.3 v) i oha /i ola = 3 ma (min) (v cca = 1.65 v) i oha /i ola = 1 ma (min) (v cca = 1.4 v)) ? latch-up performance: 300 ma ? esd performance: machine model 200 v human body model 2000 v ? ultra-small package: vssop (us16), vqon16 ? low current consumption: using the new circuit significantly reduces current consumption when oe = ?h?. suitable for battery-driven applications such as pdas and cellular phones. ? floating a-bus and b-bus are permitted. (when oe = ?h?) 3.6-v tolerant function and power-down protec tion provided on all inputs and outputs. note 1: do not apply a signal to any bus pins when it is in the output mode. damage may result. note: when mounting vqon package, the type of recommended flux is ra or rma. tc7mpn3125fk TC7MPN3125FTG weight vssop16-p-0030-0.50: 0.02 g (typ.) vqon16-p-0303-0.50: 0.013 g (typ.) start of commercial production 2011-04
tc7mpn3125fk/ftg 2014-03-01 2 pin assignment (top view) iec logic symbol truth table marking inputs function oe 1 1dir bus 1a1-1a2 bus 1b1-1b2 outputs l l output input a = b l h input output b = a h x z z inputs function oe 2 2dir bus 2a1-2a2 bus 2b1-2b2 outputs l l output input a = b l h input output b = a h x z z x: don?t care z: high impedance v ccb oe 2 v cca 1dir 2dir 2a1 1 2 3 4 5 6 7 8 gnd 16 15 14 13 12 11 10 9 1a1 1a2 2a2 oe1 gnd 1b1 1b2 2b1 2b2 fk(vssop16-p-0030-0.50) 1 2 3 4 2dir 1a1 1a2 2a1 16 15 14 13 1dir v cca v ccb oe1 5 6 7 8 2a2 gnd gnd 2b2 12 11 10 9 oe2 1b1 1b2 2b1 ftg (vqon16-p-0303-0.50) p 0 5 ** * product name lot trace code ftg (vqon16-p-0303-0.50) 1 pin g3 3 en1 (ba) 3 en2 (ab) g6 6 en4 (ba) 6 en5 (ab) 1 2 4 5 oe1 1dir oe2 2dir 1a1 1a2 2a1 2a2 1b1 1b2 2b1 2b2
tc7mpn3125fk/ftg 2014-03-01 3 block diagram v cca v ccb 1dir 1a1-2 1b1-2 logic level converter oe1 v cca v ccb 2dir 2a1-2 2b1-2 logic level converter oe2
tc7mpn3125fk/ftg 2014-03-01 4 absolute maximum ratings (note 1) characteristics symbol rating unit v cca ? 0.5 to 4.6 power supply voltage (note 2) v ccb ? 0.5 to 4.6 v dc input voltage (dir, oe ) v in ? 0.5 to 4.6 v ? 0.5 to 4.6 (note 3) v i/oa ? 0.5 to v cca + 0.5 (note 4) ? 0.5 to 4.6 (note 3) dc bus i/o voltage v i/ob ? 0.5 to v ccb + 0.5 (note 4) v input diode current i ik ? 50 ma output diode current i i/ok 50 (note 5) ma i outa 25 dc output current i outb 6 ma i cca 50 dc v cc /ground current per supply pin i ccb 50 ma power dissipation p d 180 mw storage temperature t stg ? 65 to 150 c note 1: exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in ic performance or even destruction. using continuously under heavy loads (e.g. the app lication of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temper ature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 2: don?t supply a voltage to v ccb pin when v cca is in the off state. note 3: output in off state note 4: high or low stats. i out absolute maximum rating must be observed. note 5: v out < gnd, v out > v cc
tc7mpn3125fk/ftg 2014-03-01 5 operating ranges (note 1) characteristics symbol rating unit v cca 1.1 to 2.7 power supply voltage (note 2) v ccb 1.65 to 3.6 v input voltage (dir, oe ) v in 0 to 3.6 v 0 to 3.6 (note 3) v i/oa 0 to v cca (note 4) 0 to 3.6 (note 3) bus i/o voltage v i/ob 0 to v ccb (note 4) v 9 (note 5) 3 (note 6) i outa 1 (note 7) 3 (note 8) 2 (note 9) output current i outb 0.5 (note 10) ma operating temperature t opr ? 40 to 85 c input rise and fall time dt/dv 0 to 10 (note 11) ns/v note 1: the operating ranges must be maintained to ens ure the normal operation of the device. unused inputs and bus inputs must be tied to either v cc or gnd. please connect both bus inputs and the bus outputs with v cc or gnd when the i/o of the bus terminal changes by the function. in this ca se, please note that the output is not short-circuited. note 2: don?t use in v cca > v ccb note 3: output in off state note 4: high or low state note 5: v ccb = 2.3 to 2.7 v note 6: v ccb = 1.65 to 1.95 v note 7: v ccb = 1.4 to 1.6 v note 8: v cca = 3.0 to 3.6 v note 9: v cca = 2.3 to 2.7 v note 10: v cca = 1.65 to 1.95 v note 11: v in = 0.8 to 2.0 v, v cca = 2.5 v, v ccb = 3.0 v
tc7mpn3125fk/ftg 2014-03-01 6 electrical characteristics dc characteristics (2.3 v v cca 2.7 v, 2.7 v < v ccb 3.6 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 2.3 to 2.7 2.7 to 3.6 1.6 ? h-level input voltage v ihb bn 2.3 to 2.7 2.7 to 3.6 2.0 ? v v ila dir, oe , an 2.3 to 2.7 2.7 to 3.6 ? 0.7 l-level input voltage v ilb bn 2.3 to 2.7 2.7 to 3.6 ? 0.8 v i oha = ? 100 a 2.3 to 2.7 2.7 to 3.6 v cca ? 0.2 ? v oha i oha = ? 9 ma 2.3 2.7 to 3.6 1.7 ? i ohb = ? 100 a 2.3 to 2.7 2.7 to 3.6 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 3 ma 2.3 to 2.7 3.0 2.2 ? v i ola = 100 a 2.3 to 2.7 2.7 to 3.6 ? 0.2 v ola i ola = 9 ma 2.3 2.7 to 3.6 ? 0.6 i olb = 100 a 2.3 to 2.7 2.7 to 3.6 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 3 ma 2.3 to 2.7 3.0 ? 0.55 v i oza v in = v ih or v il v out = 0 to 3.6 v 2.3 to 2.7 2.7 to 3.6 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 2.3 to 2.7 2.7 to 3.6 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 2.3 to 2.7 2.7 to 3.6 ? 1.0 a i off1 0 0 ? 2.0 i off2 2.3 to 2.7 0 ? 2.0 power-off leakage current i off3 v in , v out = 0 to 3.6 v 2.3 to 2.7 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 2.3 to 2.7 2.7 to 3.6 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 2.3 to 2.7 2.7 to 3.6 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 2.3 to 2.7 2.7 to 3.6 ? 2.0 i ccb v ccb (v in , v out ) 3.6 v 2.3 to 2.7 2.7 to 3.6 ? 2.0 a quiescent supply current i cctb v inb = v ccb ? 0.6 v per input 2.3 to 2.7 2.7 to 3.6 ? 750.0 a
tc7mpn3125fk/ftg 2014-03-01 7 dc characteristics (1.65 v v cca < 2.3 v, 2.7 v < v ccb 3.6 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 1.65 to 2.3 2.7 to 3.6 0.65 v cca ? h-level input voltage v ihb bn 1.65 to 2.3 2.7 to 3.6 2.0 ? v v ila dir, oe , an 1.65 to 2.3 2.7 to 3.6 ? 0.35 v cca l-level input voltage v ilb bn 1.65 to 2.3 2.7 to 3.6 ? 0.8 v i oha = ? 100 a 1.65 to 2.3 2.7 to 3.6 v cca ? 0.2 ? v oha i oha = ? 3 ma 1.65 2.7 to 3.6 1.25 ? i ohb = ? 100 a 1.65 to 2.3 2.7 to 3.6 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 3 ma 1.65 to 2.3 3.0 2.2 ? v i ola = 100 a 1.65 to 2.3 2.7 to 3.6 ? 0.2 v ola i ola = 3 ma 1.65 2.7 to 3.6 ? 0.3 i olb = 100 a 1.65 to 2.3 2.7 to 3.6 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 3 ma 1.65 to 2.3 3.0 ? 0.55 v i oza v in = v ih or v il v out = 0 to 3.6 v 1.65 to 2.3 2.7 to 3.6 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 1.65 to 2.3 2.7 to 3.6 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 1.65 to 2.3 2.7 to 3.6 ? 1.0 a i off1 0 0 ? 2.0 i off2 1.65 to 2.3 0 ? 2.0 power-off leakage current i off3 v in , v out = 0 to 3.6 v 1.65 to 2.3 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 1.65 to 2.3 2.7 to 3.6 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 1.65 to 2.3 2.7 to 3.6 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 1.65 to 2.3 2.7 to 3.6 ? 2.0 i ccb v ccb (v in , v out ) 3.6 v 1.65 to 2.3 2.7 to 3.6 ? 2.0 a quiescent supply current i cctb v inb = v ccb ? 0.6 v per input 1.65 to 2.3 2.7 to 3.6 ? 750.0 a
tc7mpn3125fk/ftg 2014-03-01 8 dc characteristics (1.4 v v cca < 1.65 v, 2.7 v < v ccb 3.6 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 1.4 to 1.65 2.7 to 3.6 0.65 v cca ? h-level input voltage v ihb bn 1.4 to 1.65 2.7 to 3.6 2.0 ? v v ila dir, oe , an 1.4 to 1.65 2.7 to 3.6 ? 0.30 v cca l-level input voltage v ilb bn 1.4 to 1.65 2.7 to 3.6 ? 0.8 v i oha = ? 100 a 1.4 to 1.65 2.7 to 3.6 v cca ? 0.2 ? v oha i oha = ? 1 ma 1.4 2.7 to 3.6 1.05 ? i ohb = ? 100 a 1.4 to 1.65 2.7 to 3.6 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 3 ma 1.4 to 1.65 3.0 2.2 ? v i ola = 100 a 1.4 to 1.65 2.7 to 3.6 ? 0.2 v ola i ola = 1 ma 1.4 2.7 to 3.6 ? 0.35 i olb = 100 a 1.4 to 1.65 2.7 to 3.6 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 3 ma 1.4 to 1.65 3.0 ? 0.55 v i oza v in = v ih or v il v out = 0 to 3.6 v 1.4 to 1.65 2.7 to 3.6 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 1.4 to 1.65 2.7 to 3.6 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 1.4 to 1.65 2.7 to 3.6 ? 1.0 a i off1 0 0 ? 2.0 i off2 1.4 to 1.65 0 ? 2.0 power-off leakage current i off3 v in , v out = 0 to 3.6 v 1.4 to 1.65 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 1.4 to 1.65 2.7 to 3.6 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 1.4 to 1.65 2.7 to 3.6 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 1.4 to 1.65 2.7 to 3.6 ? 2.0 i ccb v ccb (v in , v out ) 3.6 v 1.4 to 1.65 2.7 to 3.6 ? 2.0 a quiescent supply current i cctb v inb = v ccb ? 0.6 v per input 1.4 to 1.65 2.7 to 3.6 ? 750.0 a
tc7mpn3125fk/ftg 2014-03-01 9 dc characteristics (1.1 v v cca < 1.4 v, 2.7 v < v ccb 3.6 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 1.1 to 1.4 2.7 to 3.6 0.65 v cca ? h-level input voltage v ihb bn 1.1 to 1.4 2.7 to 3.6 2.0 ? v v ila dir, oe , an 1.1 to 1.4 2.7 to 3.6 ? 0.30 v cca l-level input voltage v ilb bn 1.1 to 1.4 2.7 to 3.6 ? 0.8 v v oha i oha = ? 100 a 1.1 to 1.4 2.7 to 3.6 v cca ? 0.2 ? i ohb = ? 100 a 1.1 to 1.4 2.7 to 3.6 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 3 ma 1.1 to 1.4 3.0 2.2 ? v v ola i ola = 100 a 1.1 to 1.4 2.7 to 3.6 ? 0.2 i olb = 100 a 1.1 to 1.4 2.7 to 3.6 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 3 ma 1.1 to 1.4 3.0 ? 0.55 v i oza v in = v ih or v il v out = 0 to 3.6 v 1.1 to 1.4 2.7 to 3.6 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 1.1 to 1.4 2.7 to 3.6 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 1.1 to 1.4 2.7 to 3.6 ? 1.0 a i off 0 0 ? 2.0 i off 1.1 to 1.4 0 ? 2.0 power-off leakage current i off v in , v out = 0 to 3.6 v 1.1 to 1.4 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 1.1 to 1.4 2.7 to 3.6 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 1.1 to 1.4 2.7 to 3.6 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 1.1 to 1.4 2.7 to 3.6 ? 2.0 i ccb v ccb (v in , v out ) 3.6 v 1.1 to 1.4 2.7 to 3.6 ? 2.0 quiescent supply current i cctb v inb = v cca ? 0.6 v per input 1.1 to 1.4 2.7 to 3.6 ? 750.0 a
tc7mpn3125fk/ftg 2014-03-01 10 dc characteristics (1.65 v v cca < 2.3 v, 2.3 v v ccb 2.7 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 1.65 to 2.3 2.3 to 2.7 0.65 v cca ? h-level input voltage v ihb bn 1.65 to 2.3 2.3 to 2.7 1.6 ? v v ila dir, oe , an 1.65 to 2.3 2.3 to 2.7 ? 0.35 v cca l-level input voltage v ilb bn 1.65 to 2.3 2.3 to 2.7 ? 0.7 v i oha = ? 100 a 1.65 to 2.3 2.3 to 2.7 v cca ? 0.2 ? v oha i oha = ? 3 ma 1.65 2.3 to 2.7 1.25 ? i ohb = ? 100 a 1.65 to 2.3 2.3 to 2.7 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 2 ma 1.65 to 2.3 2.3 1.7 ? v i ola = 100 a 1.65 to 2.3 2.3 to 2.7 ? 0.2 v ola i ola = 3 ma 1.65 2.3 to 2.7 ? 0.3 i olb = 100 a 1.65 to 2.3 2.3 to 2.7 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 2 ma 1.65 to 2.3 2.3 ? 0.6 v i oza v in = v ih or v il v out = 0 to 3.6 v 1.65 to 2.3 2.3 to 2.7 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 1.65 to 2.3 2.3 to 2.7 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 1.65 to 2.3 2.3 to 2.7 ? 1.0 a i off1 0 0 ? 2.0 i off2 1.65 to 2.3 0 ? 2.0 power-off leakage current i off3 v in , v out = 0 to 3.6 v 1.65 to 2.3 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 1.65 to 2.3 2.3 to 2.7 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 1.65 to 2.3 2.3 to 2.7 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 1.65 to 2.3 2.3 to 2.7 ? 2.0 quiescent supply current i ccb v ccb (v in , v out ) 3.6 v 1.65 to 2.3 2.3 to 2.7 ? 2.0 a
tc7mpn3125fk/ftg 2014-03-01 11 dc characteristics (1.4 v v cca < 1.65 v, 2.3 v v ccb 2.7 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 1.4 to 1.65 2.3 to 2.7 0.65 v cca ? h-level input voltage v ihb bn 1.4 to 1.65 2.3 to 2.7 1.6 ? v v ila dir, oe , an 1.4 to 1.65 2.3 to 2.7 ? 0.30 v cca l-level input voltage v ilb bn 1.4 to 1.65 2.3 to 2.7 ? 0.7 v i oha = ? 100 a 1.4 to 1.65 2.3 to 2.7 v cca ? 0.2 ? v oha i oha = ? 1 ma 1.4 2.3 to 2.7 1.05 ? i ohb = ? 100 a 1.4 to 1.65 2.3 to 2.7 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 2 ma 1.4 to 1.65 2.3 1.7 ? v i ola = 100 a 1.4 to 1.65 2.3 to 2.7 ? 0.2 v ola i ola = 1 ma 1.4 2.3 to 2.7 ? 0.35 i olb = 100 a 1.4 to 1.65 2.3 to 2.7 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 2 ma 1.4 to 1.65 2.3 ? 0.6 v i oza v in = v ih or v il v out = 0 to 3.6 v 1.4 to 1.65 2.3 to 2.7 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 1.4 to 1.65 2.3 to 2.7 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 1.4 to 1.65 2.3 to 2.7 ? 1.0 a i off1 0 0 ? 2.0 i off2 1.4 to 1.65 0 ? 2.0 power-off leakage current i off3 v in , v out = 0 to 3.6 v 1.4 to 1.65 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 1.4 to 1.65 2.3 to 2.7 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 1.4 to 1.65 2.3 to 2.7 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 1.4 to 1.65 2.3 to 2.7 ? 2.0 quiescent supply current i ccb v ccb (v in , v out ) 3.6 v 1.4 to 1.65 2.3 to 2.7 ? 2.0 a
tc7mpn3125fk/ftg 2014-03-01 12 dc characteristics (1.1 v v cca < 1.4 v, 2.3 v v ccb 2.7 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 1.1 to 1.4 2.3 to 2.7 0.65 v cca ? h-level input voltage v ihb bn 1.1 to 1.4 2.3 to 2.7 1.6 ? v v ila dir, oe , an 1.1 to 1.4 2.3 to 2.7 ? 0.30 v cca l-level input voltage v ilb bn 1.1 to 1.4 2.3 to 2.7 ? 0.7 v v oha i oha = ? 100 a 1.1 to 1.4 2.3 to 2.7 v cca ? 0.2 ? i ohb = ? 100 a 1.1 to 1.4 2.3 to 2.7 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 2 ma 1.1 to 1.4 2.3 1.7 ? v v ola i ola = 100 a 1.1 to 1.4 2.3 to 2.7 ? 0.2 i olb = 100 a 1.1 to 1.4 2.3 to 2.7 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 2 ma 1.1 to 1.4 2.3 ? 0.6 v i oza v in = v ih or v il v out = 0 to 3.6 v 1.1 to 1.4 2.3 to 2.7 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 1.1 to 1.4 2.3 to 2.7 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 1.1 to 1.4 2.3 to 2.7 ? 1.0 a i off 0 0 ? 2.0 i off 1.1 to 1.4 0 ? 2.0 power-off leakage current i off v in , v out = 0 to 3.6 v 1.1 to 1.4 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 1.1 to 1.4 2.3 to 2.7 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 1.1 to 1.4 2.3 to 2.7 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 1.1 to 1.4 2.3 to 2.7 ? 2.0 quiescent supply current i ccb v ccb (v in , v out ) 3.6 v 1.1 to 1.4 2.3 to 2.7 ? 2.0 a
tc7mpn3125fk/ftg 2014-03-01 13 dc characteristics (1.1 v v cca < 1.4 v, 1.65 v v ccb < 2.3 v) ta = ? 40 to 85c characteristics symbol test condition v cca (v) v ccb (v) min max unit v iha dir, oe , an 1.1 to 1.4 1.65 to 2.3 0.65 v cca ? h-level input voltage v ihb bn 1.1 to 1.4 1.65 to 2.3 0.65 v ccb ? v v ila dir, oe , an 1.1 to 1.4 1.65 to 2.3 ? 0.30 v cca l-level input voltage v ilb bn 1.1 to 1.4 1.65 to 2.3 ? 0.35 v ccb v v oha i oha = ? 100 a 1.1 to 1.4 1.65 to 2.3 v cca ? 0.2 ? i ohb = ? 100 a 1.1 to 1.4 1.65 to 2.3 v ccb ? 0.2 ? h-level output voltage v ohb v in = v ih or v il i ohb = ? 0.5 ma 1.1 to 1.4 1.65 1.25 ? v v ola i ola = 100 a 1.1 to 1.4 1.65 to 2.3 ? 0.2 i olb = 100 a 1.1 to 1.4 1.65 to 2.3 ? 0.2 l-level output voltage v olb v in = v ih or v il i olb = 0.5 ma 1.1 to 1.4 1.65 ? 0.3 v i oza v in = v ih or v il v out = 0 to 3.6 v 1.1 to 1.4 1.65 to 2.3 ? 2.0 3-state output off state current i ozb v in = v ih or v il v out = 0 to 3.6 v 1.1 to 1.4 1.65 to 2.3 ? 2.0 a input leakage current i in v in (dir, oe ) = 0 to 3.6 v 1.1 to 1.4 1.65 to 2.3 ? 1.0 a i off1 0 0 ? 2.0 i off2 1.1 to 1.4 0 ? 2.0 power-off leakage current i off3 v in , v out = 0 to 3.6 v 1.1 to 1.4 open ? 2.0 a i cca v ina = v cca or gnd v inb = v ccb or gnd 1.1 to 1.4 1.65 to 2.3 ? 2.0 i ccb v ina = v cca or gnd v inb = v ccb or gnd 1.1 to 1.4 1.65 to 2.3 ? 2.0 a i cca v cca (v in , v out ) 3.6 v 1.1 to 1.4 1.65 to 2.3 ? 2.0 quiescent supply current i ccb v ccb (v in , v out ) 3.6 v 1.1 to 1.4 1.65 to 2.3 ? 2.0 a
tc7mpn3125fk/ftg 2014-03-01 14 ac characteristics (ta = ? 40 to 85c, input: t r = t f = 2.0 ns) v cca = 2.5 0.2 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 5.4 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 8.4 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 6.7 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 13.7 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 16.6 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 7.2 ns output to output skew t oslh t oshl (note) ? 0.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |) v cca = 1.8 0.15 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 8.9 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 13.4 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 10.9 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 14.8 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 18.9 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 8.7 ns output to output skew t oslh t oshl (note) ? 0.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |)
tc7mpn3125fk/ftg 2014-03-01 15 v cca = 1.5 0.1 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 10.3 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 18.5 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 13.0 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 16.0 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 22.8 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 10.2 ns output to output skew t oslh t oshl (note) ? 1.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |) v cca = 1.2 0.1 v, v ccb = 3.3 0.3 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 61 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 95 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 44 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 29 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 63 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 23 ns output to output skew t oslh t oshl (note) ? 1.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |)
tc7mpn3125fk/ftg 2014-03-01 16 v cca = 1.8 0.15 v, v ccb = 2.5 0.2 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 9.1 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 13.5 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 11.8 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 18.5 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 23.6 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 6.9 ns output to output skew t oslh t oshl (note) ? 0.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |) v cca = 1.5 0.1 v, v ccb = 2.5 0.2 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 10.8 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 18.3 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 14.2 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 19.7 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 26.6 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 8.3 ns output to output skew t oslh t oshl (note) ? 1.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |)
tc7mpn3125fk/ftg 2014-03-01 17 v cca = 1.2 0.1 v, v ccb = 2.5 0.2 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 60 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 95 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 45 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 33 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 66 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 20 ns output to output skew t oslh t oshl (note) ? 1.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |) v cca = 1.2 0.1 v, v ccb = 1.8 0.15 v characteristics symbol te st condition min max unit propagation delay time (bn an) t plh t phl figure 1, figure 2 1.0 58 3-state output enable time ( oe an) t pzl t pzh figure 1, figure 3 1.0 92 3-state output disable time ( oe an) t plz t phz figure 1, figure 3 1.0 47 ns propagation delay time (an bn) t plh t phl figure 1, figure 2 1.0 43 3-state output enable time ( oe bn) t pzl t pzh figure 1, figure 3 1.0 78 3-state output disable time ( oe bn) t plz t phz figure 1, figure 3 1.0 20 ns output to output skew t oslh t oshl (note) ? 1.5 ns note: parameter guaranteed by design. (t oslh = |t plhm ? t plhn |, t oshl = |t phlm ? t phln |)
tc7mpn3125fk/ftg 2014-03-01 18 dynamic switching characteristics (ta = 25c, input: t r = t f = 2.0 ns, c l = 30 pf) characteristics symbol test condition v cca (v) v ccb (v) typ. unit 2.5 3.3 0.35 1.8 3.3 0.35 a b 1.8 2.5 0.25 2.5 3.3 0.6 1.8 3.3 0.25 quiet output maximum dynamic v ol b a v olp v ih = v cc , v il = 0 v (note) 1.8 2.5 0.25 v 2.5 3.3 ? 0.35 1.8 3.3 ? 0.35 a b 1.8 2.5 ? 0.25 2.5 3.3 ? 0.6 1.8 3.3 ? 0.25 quiet output minimum dynamic v ol b a v olv v ih = v cc , v il = 0 v (note) 1.8 2.5 ? 0.25 v 2.5 3.3 3.95 1.8 3.3 3.95 a b 1.8 2.5 2.95 2.5 3.3 3.3 1.8 3.3 2.3 quiet output maximum dynamic v oh b a v ohp v ih = v cc , v il = 0 v (note) 1.8 2.5 2.3 v 2.5 3.3 2.65 1.8 3.3 2.65 a b 1.8 2.5 2.05 2.5 3.3 1.7 1.8 3.3 1.3 quiet output minimum dynamic v oh b a v ohv v ih = v cc , v il = 0 v (note) 1.8 2.5 1.3 v note: parameter guaranteed by design. capacitive characteristics (ta = 25c) characteristics symbol test circuit v cca (v) v ccb (v) typ. unit input capacitance c in dir, oe 2.5 3.3 7 pf bus i/o capacitance c i/o an, bn 2.5 3.3 8 pf a b (dir = ?h?) 2.5 3.3 3 oe = ?l? b a (dir = ?l?) 2.5 3.3 16 a b (dir = ?h?) 2.5 3.3 0 c pda oe = ?h? b a (dir = ?l?) 2.5 3.3 0 a b (dir = ?h?) 2.5 3.3 16 oe = ?l? b a (dir = ?l?) 2.5 3.3 5 a b (dir = ?h?) 2.5 3.3 0 power dissipation capacitance (note) c pdb oe = ?h? b a (dir = ?l?) 2.5 3.3 0 pf note: c pd is defined as the value of the internal equivalent capacitance which is ca lculated from the operating current consumption without load. average operating current can be obtained by the equation: i cc (opr) = c pd ?v cc ?f in + i cc /4 (per bit)
tc7mpn3125fk/ftg 2014-03-01 19 ac test circuit v cc (output) symbol 3.3 0.3 v 2.5 0.2 v 1.8 0.15 v 1.5 0.1 v 1.2 0.1 v r l1/2a 500 1 k 2 k 10 k c la 30 pf 30 pf 15 pf 15 pf r l1b ? ? ? ? r l2b 1 k 1 k 1 k 1 k c lb 30 pf 30 pf 30 pf 30 pf figure 1 parameter switch t plh , t phl open 6.0 v @ v cc = 3.3 0.3 v t plz , t pzl v cc 2 @ v cc = 2.5 0.2 v @ v cc = 1.8 0.15 v @ v cc = 1.5 0.1 v @ v cc = 1.2 0.1 v t phz , t pzh gnd 6.0 v or v cc 2 open gnd switch out p ut measure r l2 r l1 c l
tc7mpn3125fk/ftg 2014-03-01 20 ac waveform v cc symbol 3.3 0.3 v 2.5 0.2 v 1.8 0.15 v 1.5 0.1 v 1.2 0.1 v v ih 2.7 v v cc v cc v m 1.5 v v cc /2 v cc /2 v x v ol + 0.3 v v ol + 0.15 v v ol + 0.1 v v y v oh ? 0.3 v v oh ? 0.15 v v oh ? 0.1 v figure 2 t plh , t phl 90% 10% output (bn, an) input (an, bn) v ol v oh v ih v m t plh t phl t r 2.0 ns t f 2.0 ns v m gnd 90% 10% v ol 3.0 v or v cc gnd v ih v m t phz t pzh t r 2.0 ns t f 2.0 ns v m gnd v oh outputs enabled v m t plz t pzl v y outputs disabled outputs enabled output enable control ( oe ) output (an, bn) low to off to low output (an, bn) high to off to high v x figure 3 t plz , t phz , t pzl , t pzh
tc7mpn3125fk/ftg 2014-03-01 21 package dimensions weight: 0.02 g (typ.)
tc7mpn3125fk/ftg 2014-03-01 22 package dimensions weight: 0.013 g (typ.)
tc7mpn3125fk/ftg 2014-03-01 23 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively "toshiba"), reserve the right to make changes to the in formation in this document, and related hardware, software and systems (collectively "product") without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba's written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product's quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situat ions in which a malfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, cu stomers must also refer to and comply with (a) the latest ve rsions of all relevant toshiba information, including without limitation, this document, the specifications, the data sheets and applicat ion notes for product and the precautions and condi tions set forth in the "toshiba se miconductor reliability handbook" and (b) the instructions for the application with which the product will be us ed with or for. customers are solely responsible for all aspe cts of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this product in such design or applications; (b) eval uating and determining the applicability of any info rmation contained in this document, or in c harts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operatin g parameters for such designs and applications. toshiba assumes no liability for customers' product design or applications. ? product is neither intended nor warranted fo r use in equipments or systems that require extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage and/or serious public impact ( " unintended use " ). except for specific applications as expressly stated in this document, unintended use includes, without limitation, equipment used in nuclear fac ilities, equipment used in the aerospace industry, medical equipment, equipment used f or automobiles, trains, ships and other transportation, traffic si gnaling equipment, equipment used to control combustions or expl osions, safety devices, elevators and escalators, devices related to electric power, and eq uipment used in financ e-related fields. if you use product for unintended use, toshiba assumes no liability for product. for details, please contact your toshiba sales representative. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the applicable export laws and regulations includ ing, without limitation, the japanese fo reign exchange and foreign trade law and t he u.s. export administration regulat ions. export and re-export of product or related software or technology are strictly prohibit ed except in compliance with all appl icable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclus ion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.

▲Up To Search▲

Price & Availability of TC7MPN3125FTG

	To Download TC7MPN3125FTG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .